Iron Water Filter
To eliminate iron staining on your surfaces and clothing, and improve the taste and odor of your drinking water, you may need an iron water filter.
WaterBoss Models 700 and 900
Many well water sources require an iron water filter. WaterBoss Models 700 and 900 have a built in iron water filter capability. By a using a packed bed of fine mesh resin, WaterBoss can handle up to10ppm of iron, twice as much as a conventional DYI water softener.
Waterboss Model 900IF
In more severe iron water conditions,using the WaterBoss Model 900IF iron water filter, may be necessary. The Model 900 IF is a dedicated iron water filter with a maximum ferrous iron reduction of 15 ppm. The Model 900IF uses a green sand media. Greensand is one of the oldest and effective oxidation technologies. Potassium permanganate is used to regenerate the greensand. In this application, potassium permanganate produces manganese dioxide on the surface of the mineral andwhen the water comes in contact with it any iron is immediately oxidized. The iron is then filtered and cleaned away in the backwash cycle. The WaterBoss model 900 IF iron water filter can be used in tandem with WaterBoss Models 700, 900 or any conventional softener. If you have questions regarding Iron Water and whether or not you need a dedicated iron water filter is needed, contact the WaterBoss technical support line at 1 800 437 8993.